Loading...

SLED 2023 Online Proceeding


 Oral Presentation

Oral Presentation


ID Title/Authors Presentation/Q&A
S1. Signal Injection Sensor-less Drives (8/17, 11:00~12:40, Chair. Prof. Jung-Ik Ha) TOP
S1-1
Investigation of Pulsating Vector Excitation Saliency-based Rotor Position Estimation Method in Current-source Inverters
Woongkul Lee(Michigan State University), Renato Amorim Torres(University of Wisconsin-Madison)
S1-2
Analysis of Static Eccentricity on the Position Estimation of Zero-Sequence Voltage Based Sensorless Techniques
Carsten Klein(Saarland University), Niklas König(Universität des Saarlandes), Marco Palmieri(Università degli Studi della Basilicata), Matthias Nienhaus(Saarland University), Emanuele Grasso(Saarland University)
S1-3
Zero Voltage Vector Based Initial Magnet Polarity Identification Strategy of PMSM Drives
Guoqiang Zhang(Harbin Institute of Technology), Kairan Wang(Harbin Institute of Technology), Rundong Li(Harbin Institute of Technology), Gaolin Wang(Harbin Institute of Technology), Dianguo Xu(Harbin Institute of Technology)
S1-4
Comparison of Different Compensation Methods of the Mutual Inductance for Self-Sensing Control
Niklas Himker(Leibniz Universität Hannover), Georg Lindemann(Leibniz Universität Hannover), Axel Mertens(Leibniz University Hannover - Institute for Drive Systems and Power Electronics)
S1-5
Sensorless Control of PMSM Based on Hybrid Extended State Observer
Van Nam Nguyen(Yeungnam University), Dong-Choon Lee(Yeungnam University)
S2. PMSM Drives 1 (8/17, 13:40~15:40 , Chair. Prof. Seung-Ki Sul) TOP
S2-1
Restart Strategy for Sensorless PMSM Drive with Single Zero Voltage Vector in Railway Application
Fei Du(Dalian University of Technology), Jian Li(Huazhong University of Science and Technology), GuoFeng Li(Dalian University of Technology)
S2-2
Simple Rotor Polarity Reversal Recovery in EV Traction Motor Sensorless Control
Myeong-Won Kim(Yonsei University), Jung-Wook Park(Yonsei University)
S2-3
Sensorless Control of High-Speed Surface Permanent Magnet Synchronous Motors for Enhanced Dynamic Performance
shun lan(Huazhong University of Science and Technology), Jian Li(Huazhong University of Science and Technology)
S2-4
Estimation of d-q Inductances and Initial Rotor Position Considering Voltage Distortions in High-Speed Motors for Air Compressors of Fuel-Cell Systems
Sungho Kang(Hanyang University), Min seong Lee(Hanyang University), Sang gyu Lee(Hanyang University), Young-Doo Yoon(Hanyang University)
S2-5
Self-Sensing Control of a PMSM used for an Automotive Application with a novel Rotor Position Estimator based on the Back-Electromotive Force
Viktor Willich(Leibniz University Hannover - Institute for Drive Systems and Power Electronics), Axel Mertens (Leibniz University Hannover - Institute for Drive Systems and Power Electronics)
S2-6
Hexa-Active Vector Pulsewidth Modulation in IPMSM Sensorless Drives Using Single DC-Link Current Sensor
Byung Ryang Park(Seoul National University), Jung-Ik Ha(Seoul National University)
S3. IM/SRM/Wound-Rotor SM Drives (8/17, 16:00~18:00 , Chair. Prof. Marko Hinkkanen) TOP
S3-1
High-Efficiency Control Method of V/f Control for Switched Reluctance Motor
Hirotaka Kato(Nagaoka University Of Technology), Junichi Itoh (Nagaoka University Of Technology)
S3-2
V/f control method for torque ripple reduction in a single phase induction motor
SEUNG CHEOL CHOI(LS Electric), Jung-Han Kim(LS Electric), Young-Doo Yoon(Hanyang University), CHAN OOK HONG(LS Electric), Cheol-Hyun Park(LS Electric), JOO HYUN CHO(LS Electric)
S3-3
Flux Saturation Model using Arctangent and Logarithm Functions considering the Flux Characteristics of Synchronous Reluctance Machines
TAEGYEOM WOO(Hanyang University), Hyun-Jun LEE(Hanyang University), Young-Doo Yoon(Hanyang University)
S3-4
Evaluation of an Induction Machine’s Differential High Frequency Inductance for Self-Sensing Control Considering Iron Saturation
Constantin Schepe(Leibniz University Hannover - Institute for Drive Systems and Power Electronics), Bernd Ponick(Leibniz University Hannover)
S3-5
Speed-Adaptive Full-Order Observer Revisited: Closed-Form Design for Induction Motor Drives
Lauri Tiitinen(Aalto University), Marko Hinkkanen(Aalto University), Lennart Harnefors(ABB Corporate Research)
S3-6
Sensorless Drive for Wound Rotor Synchronous Generator with Brushless Excitation System in Maritime DC Microgrid
Seung-Ki Sul(Seoul National University), Jonghun Yun(Seoul National University), Sanggi Ko(Seoul National University), Woojae Park(Korea Shipbuilding & Offshore Engineering Co., Ltd.), Sanghyun Kim(Korea Shipbuilding & Offshore Engineering Co., Ltd.)
S4. Special Solutions (8/18, 09:00~10:40, Chair. Prof. Junich Itoh) TOP
S4-1
Multi-Channel Neural Network-Based Thermal Monitoring of Electric Motor
Jaehoon Shim(Seoul National University), Jonghun Choi(Seoul National University), Sangwon Lee(Seoul National University), Jung-Ik Ha(Seoul National University)
S4-2
Implementation of AC current-sensor-less control and high-frequency modulation of an all-SiC Current Source Inverter
Yonghwa LEE(Kyoto University of Advanced Science), Alberto Castellazzi(Kyoto University of Advanced Science)
S4-3
Full-Speed Sensorless Control Scheme for Permanent Magnet Synchronous Motor Using Artificial Neural Network
Hasan Al-kaf(Ajou University), Sadeq Mohammed(Ajou University), Kyo-Beum Lee(Ajou University)
S4-4
Sensorless Control of a Two-Phase Linear PMSM exploiting PWM-Induced Current Ripples
Niklas König(Universität des Saarlandes), Joshua Summa(Universität des Saarlandes), Matthias Nienhaus(Saarland University), Emanuele Grasso(Saarland University)
S4-5
A Practical Position Sensorless Control of Long-Cable-Fed PMSM Drives with a Sine-wave Filter for Electrical Submersible Pumps
Hanyoung Bu(Konkuk University), Younghoon Cho(Konkuk University)
S5. PMSM Drives 2 (8/18, 11:00~12:40, Chair. Prof. Dong-Choon Lee) TOP
S5-1
Improved Predictive Torque Control with Unidirectional Voltage Vector Selection of PMSM fed by Three-Level Neutral-Point-Clamped Inverter
Ibrahim ALSOFYANI(SEMI-TS), Kyo-Beum Lee(Ajou University)
S5-2
Zero-position Deviation Calibration of PMSM Based on I/f Control Strategy and Slide Mode Observer for Electric Power Steering System
Yingzhe Wu(Shanghai Gatek Automotive Electronics Co.,Ltd), Hui Li(University of Electronic Science and Technology of China), Lisheng Wang(Shanghai Gatek Automotive Electronics Co.,Ltd), Shan Yin(Innoscience & University of Electronic Science and Technology of China)
S5-3
Improved Hybrid Current Regulation for Interior PMSM Drives Subjected to Internal/External Distortions
Sadeq Mohammed(Ajou University), Kyo-Beum Lee(Ajou University)
S5-4
Modified Phase-Shift PWM for Common-Mode Voltage Reduction in PMSM Drives Fed by Five-Level HANPC Inverter
Samer Hakami(Ajou University), Kyo-Beum Lee(Ajou University)
S5-5
Analysis of Pulse Width Modulation Methods for PMSM Sensorless Control Based on Current Derivative Measurement
Juwon Lee(Seoul National University), Byung Ryang Park(Seoul National University), Jung-Ik Ha(Seoul National University)
S6. Modeling & Control Techniques (8/18, 13:40~15:40, Chair. Dr. Ibrahim ALSOFYAN) TOP
S6-1
Static Friction Torque Estimation for Robot Manipulators Using a Data-Driven Approach
Jaehoon Shim(Seoul National University), Sangwon Lee(Seoul National University), Daesung Jeon(Hyundai Robotics), Jung-Ik Ha(Seoul National University)
S6-2
A Virtual Space Model based on Torque Gradient of IPMSMs with Non-linear Characteristics
Takumi Ohnuma(National Institute of Technology, Numazu College),
S6-3
Efficient Fault Detection for Open Circuit Faults in HANPC Inverters Using Artificial Neural Network for Motor Drive Applications
Laith M. HalabiNablus(University for Vocational & Technical Education), Hasan Al-kaf(Ajou University), Kyo-Beum Lee(Ajou University)
S6-4
Online Inductance Identification for PMSM Sensorless Control Immune to Position Error
Qiwei Wang(Harbin Institute of Technology), Jiqing Xue(Harbin Institute of Technology), Gaolin Wang(Harbin Institute of Technology), Guoqiang Zhang(Harbin Institute of Technology), Dianguo Xu(Harbin Institute of Technology)
S6-5
DC Current Sensing Drive Scheme for Ultra-Low Inductance PMSMs with Enhanced Low-Speed Performance
Kahyun Lee(Ewha Womans University), Hyeon-Gyu Choi(Incheon National University)
S6-6
Torque Ripple Suppression Technique of High-Frequency Signal Injection-Based Sensorless Control
Hyun-Jun LEE(Hanyang University), Je-Eok Joo(Hanyang University), Young-Doo Yoon(Hanyang University)